Hi, what are you looking for?
New US Hydrogen Strategy: Wrong Department, Wrong Authors
Solar Panels Should Be Donated To Ukraine ASAP
Kentucky Emerges From Solar Energy Stealth Mode
What Is Needed For A Just Transition To Renewables?
How Inflation Reduction Act Will Subsidize Residential Energy Storage Systems, Including Vanadium Batteries
New US Hydrogen Strategy: Wrong Department, Wrong Authors
USA & UAE Team Up On Clean Energy — $100 Billion Investment
Green Grid to Connect Asia
The Demented Gift American Politicians Handed To China
Tenerife’s Barriers To Renewable Energy Are Substantial But Not Insurmountable
Tenerife’s Barriers To Renewable Energy Are Substantial But Not Insurmountable
Your Rechargeable Batteries Need Lithium. Geothermal Energy Could Soon Help. (Surprise Video)
On the Road to 100% Clean Electricity: 6 Potential Strategies To Break Through Last Few Percent
President William Ruto Sworn In, Reaffirms Kenya’s Commitment To Transition To 100% Clean Energy By 2030
New Lithium StoryMap & the Future of Electrification
New US Hydrogen Strategy: Wrong Department, Wrong Authors
How Inflation Reduction Act Will Subsidize Residential Energy Storage Systems, Including Vanadium Batteries
California Taco Bell Receives First EV Charging Stations
Toyota Places Recycled EV Batteries On Grid
Existing Water Infrastructure Holds Key To Generating More U.S. Hydropower
USA’s 1st Vehicle-To-Grid Export Rate For Commercial Electric Vehicles
Shyft Group Shows Off Its Blue Arc Electric Last Mile Delivery Vehicle To Customers
Volvo EX90 Will Feature App-Based AC & DC Bi-Directional Charging
Want Energy Resilience? Invest Locally In Community Solar, Rooftop Solar, Heat Pumps, EVs
East Bay Customers Support California’s Grid During Extreme Heat Wave Through Innovative Program
Solar Photovoltaic Module Design Has Wide-Ranging Impacts On Our Clean-Energy Future
“Deploy!” Says Beyond Zero Emissions
A 3-Way Deal To Use Wasted Energy In Natural Gas Distribution
Hug Your Super-Efficient Water Heater On Heat Pump Water Heater Day
Heat Pumps Get A Boost In UK & Newfoundland
NAPA & Qmerit Offer Comprehensive Electric Vehicle Charging Solutions
Dodge Charger Daytona SRT Concept — Muscle Car With An EV Attitude!
Tesla Temporarily Leaked 340+ Upcoming Supercharger Stations
I Absolutely Love This Nissan Ariya Surfwagon
Sweden’s Plugin EV Share At 59.4%, Volvo XC40 Back To Strength
3 Years & 80,000 Miles With My Tesla Model 3 — Battery Degradation, Maintenance Costs, Etc.
Tesla Model Y vs. Ford Mustang Mach-E — Zach vs. Jo Debate
SunPower Turns Our Roof Into A 30 MWh/Year Powerhouse
Driving 1,000 Miles Home in the Kona Electric
Renault Twingo ZE First Impressions — Good Looking Second Car
Sweden’s Plugin EV Share At 59.4%, Volvo XC40 Back To Strength
Top 5 Automakers For Electric Vehicle Sales Globally
100% Electric Vehicles = 13% Of New Vehicle Sales Globally!
Europe Electric Car Sales — 16% of New Cars Fully Electric, 24% Have a Plug
China Electric Car Sales — 26% Fully Electric, 35% Have A Plug
3 Years & 80,000 Miles With My Tesla Model 3 — Battery Degradation, Maintenance Costs, Etc.
Tesla Model Y vs. Ford Mustang Mach-E — Zach vs. Jo Debate
SunPower Turns Our Roof Into A 30 MWh/Year Powerhouse
Driving 1,000 Miles Home in the Kona Electric
Renault Twingo ZE First Impressions — Good Looking Second Car
Watch Tesla Conference Call Live Today — With Charts, Analyst Quotes, Transcribed Questions
Fisker Ocean — CleanTechnica Walkthrough Video
The Aptera Gamma — CleanTechnica Video Walkthrough
Mazda MX-30 EV vs. Tesla Model 3 — Ultimate EV Battle Bracket
The silicon-based computer chips that power our modern devices require vast amounts of energy to operate. Despite ever-improving computing efficiency, information technology is projected to consume around 25% of all primary energy produced by 2030. Researchers in the microelectronics and materials sciences communities are seeking ways to sustainably manage the global need for computing power.
Scientists turn century-old material into a thin film for next-gen memory and logic devices
Electron microscope images show the precise atom-by-atom structure of a barium titanate (BaTiO3) thin film sandwiched between layers of strontium ruthenate (SrRuO3) metal to make a tiny capacitor. (Credit: Lane Martin/Berkeley Lab)
The holy grail for reducing this digital demand is to develop microelectronics that operate at much lower voltages, which would require less energy and is a primary goal of efforts to move beyond today’s state-of-the-art CMOS (complementary metal-oxide semiconductor) devices.
Non-silicon materials with enticing properties for memory and logic devices exist; but their common bulk form still requires large voltages to manipulate, making them incompatible with modern electronics. Designing thin-film alternatives that not only perform well at low operating voltages but can also be packed into microelectronic devices remains a challenge.
Now, a team of researchers at Lawrence Berkeley National Laboratory (Berkeley Lab) and UC Berkeley have identified one energy-efficient route — by synthesizing a thin-layer version of a well-known material whose properties are exactly what’s needed for next-generation devices.
First discovered more than 80 years ago, barium titanate (BaTiO3) found use in various capacitors for electronic circuits, ultrasonic generators, transducers, and even sonar.
Crystals of the material respond quickly to a small electric field, flip-flopping the orientation of the charged atoms that make up the material in a reversible but permanent manner even if the applied field is removed. This provides a way to switch between the proverbial “0” and “1” states in logic and memory storage devices — but still requires voltages larger than 1,000 millivolts (mV) for doing so.
Seeking to harness these properties for use in microchips, the Berkeley Lab-led team developed a pathway for creating films of BaTiO3 just 25 nanometers thin — less than a thousandth of a human hair’s width — whose orientation of charged atoms, or polarization, switches as quickly and efficiently as in the bulk version.
“We’ve known about BaTiO3 for the better part of a century and we’ve known how to make thin films of this material for over 40 years. But until now, nobody could make a film that could get close to the structure or performance that could be achieved in bulk,” said Lane Martin, a faculty scientist in the Materials Sciences Division (MSD) at Berkeley Lab and professor of materials science and engineering at UC Berkeley who led the work.
Historically, synthesis attempts have resulted in films that contain higher concentrations of “defects” — points where the structure differs from an idealized version of the material — as compared to bulk versions. Such a high concentration of defects negatively impacts the performance of thin films. Martin and colleagues developed an approach to growing the films that limits those defects. The findings were published in the journal Nature Materials.
To understand what it takes to produce the best, low-defect BaTiO3 thin films, the researchers turned to a process called pulsed-laser deposition. Firing a powerful beam of an ultraviolet laser light onto a ceramic target of BaTiO3 causes the material to transform into a plasma, which then transmits atoms from the target onto a surface to grow the film. “It’s a versatile tool where we can tweak a lot of knobs in the film’s growth and see which are most important for controlling the properties,” said Martin.
Martin and his colleagues showed that their method could achieve precise control over the deposited film’s structure, chemistry, thickness, and interfaces with metal electrodes. By chopping each deposited sample in half and looking at its structure atom by atom using tools at the National Center for Electron Microscopy at Berkeley Lab’s Molecular Foundry, the researchers revealed a version that precisely mimicked an extremely thin slice of the bulk.
“It’s fun to think that we can take these classic materials that we thought we knew everything about, and flip them on their head with new approaches to making and characterizing them,” said Martin.
Finally, by placing a film of BaTiO3 in between two metal layers, Martin and his team created tiny capacitors — the electronic components that rapidly store and release energy in a circuit. Applying voltages of 100 mV or less and measuring the current that emerges showed that the film’s polarization switched within two billionths of a second and could potentially be faster — competitive with what it takes for today’s computers to access memory or perform calculations.
The work follows the bigger goal of creating materials with small switching voltages, and examining how interfaces with the metal components necessary for devices impact such materials. “This is a good early victory in our pursuit of low-power electronics that go beyond what is possible with silicon-based electronics today,” said Martin.
“Unlike our new devices, the capacitors used in chips today don’t hold their data unless you keep applying a voltage,” said Martin. And current technologies generally work at 500 to 600 mV, while a thin film version could work at 50 to 100 mV or less. Together, these measurements demonstrate a successful optimization of voltage and polarization robustness — which tend to be a trade-off, especially in thin materials.
Next, the team plans to shrink the material down even thinner to make it compatible with real devices in computers and study how it behaves at those tiny dimensions. At the same time, they will work with collaborators at companies such as Intel Corp. to test the feasibility in first-generation electronic devices. “If you could make each logic operation in a computer a million times more efficient, think how much energy you save. That’s why we’re doing this,” said Martin.
This research was supported by the U.S. Department of Energy (DOE) Office of Science. The Molecular Foundry is a DOE Office of Science user facility at Berkeley Lab.
Berkeley Lab’s “Beyond Moore’s Law” initiative aims to identify pathways to ultralow power logic in memory elements. “We need to get to low-voltage operation, since that is what scales the energy,” said co-author Ramamoorthy Ramesh, a senior faculty scientist at Berkeley Lab and professor of physics and materials science and engineering at UC Berkeley. “This work demonstrated, for the first time, the switching field of the model material, BaTiO3 with voltages lower than 100 mV, on a relevant platform.”
Article courtesy of Lawrence Berkeley National Laboratory (Berkeley Lab).
Related: Global Supply Shortages: No Time, No Chips — No Problem For NREL
Featured photo: A macro of a silicon wafer, by Laura Ockel on Unsplash
The mission of the U.S. Energy Department is to ensure America’s security and prosperity by addressing its energy, environmental and nuclear challenges through transformative science and technology solutions. Learn more.
#1 most loved electric vehicle, solar energy, and battery news & analysis site in the world. Support our work today!
Advertise with CleanTechnica to get your company in front of millions of monthly readers.
The United States has a great network of waterways that is used for municipal, agricultural, and industrial purposes. With millions of miles of pipelines...
6K's new microwave plasma process takes on multiple sustainability challenges for EV batteries including carbon emissions, energy use, water conservation, waste management, supply chain...
The US Interior Department is plowing full steam ahead with Pacific Coast leases for floating offshore wind farms.
The Earth System Grid Federation, a multi-agency initiative that gathers and distributes data for top-tier projections of the Earth’s climate, is preparing a series...
Copyright © 2022 CleanTechnica. The content produced by this site is for entertainment purposes only. Opinions and comments published on this site may not be sanctioned by and do not necessarily represent the views of CleanTechnica, its owners, sponsors, affiliates, or subsidiaries.